Brazing Certification and Brazing Operators
professional and qualify them accordingly, following the validity fields specified by the
applicable regulations. The qualification can be conducted with reference to the
following standards and codes:
UNI EN ISO 13585 | Brazing
ASME BPVC Section IX | Pressure Components
Services Offered
certification of brazers and brazing operators. International Weld is Recognized as a Third
Party for the approval of personnel involved in the execution of permanent joints for pressure
equipment of categories II, III, and IV, as per Annex I, Article 3.1.2 of Directive 2014/68/EU PED.
Certification
Process
How does the qualification process for brazing personnel work with International Weld?
1. Acceptance of the economic offer.
2. Submission of the certification application.
3. Qualification activities.
4. Deliberation and issuance of the certification.
The qualification activity involves the execution of one or more sample tests representative of the production, supervised by qualified inspectors from I-WELD.
The choice of the representative sample test is often dictated by various conditions, such as the execution location (workshop or construction site), available equipment, joint geometry, acceptability criteria, material thicknesses, and diameters, and accessibility.
Destructive and non-destructive tests required by standards are carried out at laboratories accredited by I-WELD. Preparation for the test execution can occur through specific training programs or in-house training under the supervision of an expert.
Additional Information
Certification application.
Instructions for validation and maintenance of welding/brazing certification.
Continuity of qualification according to ASME and AWS.
Certification regulations.
Application Opportunities
The UNI EN ISO 13585 standard applies to brazers and operators involved in strong brazing, providing requirements for the execution of the process, test conditions, qualification, acceptability criteria, and validity fields for certification.
You can send us all documents to the e-mail: info@iweld.it
Watch this video-guide on how to validate an I-Weld certificate and how to maintain it correctly
Together we look towards the future
news!